BNZ Materials

[Back To Structural Insulating Boards]
Marinite A, and Marinite C These boards are heat treated formulations for use in conveying, containing and forming molten aluminum and other non-ferrous metals. Applications include holding furnace linings, tips for continuous casters, transition plates, rings, plugs, baffles, troughs, spouts, floats and filter boxes PDF Data Sheet MSDS for MARINITE A, MARINITE AHP
	CS85 \| marinite P \| marinite I \| marinite m \| transite ht \| transite 1000

Marinite A & Marinite C Properties

Aluminum Contact Boards	A	C
Dimensions
Available Thicknesses	½-3"	1"-2"
Sheet Sizes	These sheets are 4 feet x 8 feet
Density
pcf	65	54
kg/cm² m³	1041	865
Modulus of Rupture
psi	1400	900
kg/cm²	98	63
Compressive Strength
Ultimate load: psi	3000	2200
Ultimate load: kg/cm²	211	155
@ 5% Deformation: psi	2400	1600
@ 5% Deformation: kg/cm²	169	112

Moisture
Normal % of dry wt	2.5	2.5
Thermal Conductivity (Btu-in/ft², hr, °F )
400°F	2	0.99
600°F	-	1.00
800°F	1.92	1.03
1000°F	1.95	1.06
Thermal Conductivity W/m°K
204°C	-	0.14
316°C	-	0.14
427°C	0.28	0.15
538°C	0.28	0.15
Shrinkage %: 24 hrs @ 1350°F
Length/width	0.1	2.3
Thickness	0.8	9.4
Screw Holding Strength @ 7/8" penetration
lbs	240	220
kg	109	100

The physical and chemical properties of BNZ's materials represent values obtained in accordance with accepted test methods and are subject to normal manufacturing variations. They are supplied as a technical service and are subject to change without notice. Results should not be used for specification purposes.