Summary Data
Please request
a data sheet for the specific insulating board of interest or have
a look at this summary data sheet in 
PDF format.
| MARINITE® | TRANSITE 1000 | ||||||||
|
Aluminum Contact Boards |
A | AHP | C | ||||||
|
High Temp Structural Insul. |
CS85 | P | I&M | 1000 | |||||
|
Low Temp Industrial Board |
HT | ||||||||
|
High Density Millboard |
2200 | ||||||||
| Available Thicknesses | ¼-3" | 1/16-½" | ½-3" | ½-3" | 1"-2" | ½-2" | ½-2" | ¼-3" | ½-3" |
| Sheet Sizes | 4' x 8' | 3.28' x 3.28' | These sheets are 4 feet x 8 feet | ||||||
| Density: pcf | 85 | 70 | 65 | 65 | 54 | 60 | 46 | 100 | 98 |
| Density: kg/cm² | 1362 | 1100 | 1041 | 1041 | 865 | 961 | 737 | 1602 | 1570 |
| Modulus of Rupture: psi | 3000 | 1000 | 1400 | 1200 | 900 | 1400 | 800 | 2600 | 3000 |
| Modulus of Rupture: kg/cm3 | 210 | 70 | 98 | 84 | 63 | 98 | 56 | 183 | 211 |
| Compressive Strength | |||||||||
| Ultimate load: psi | 10300 | - | 3000 | 2800 | 2200 | - | - | 10400 | 13,350 |
| Ultimate load: kg/cm² | 724 | - | 211 | 197 | 155 | - | - | 731 | 939 |
| @ 5% Deformation: psi | 6400 | 500 | 2400 | 2000 | 1600 | 3050 | 1000 | 6500 | - |
| @ 5% Deformation: kg/cm² | 450 | 35 | 169 | 141 | 112 | 214 | 70 | 457 | - |
| MARINITE® | TRANSITE | ||||||||
|
Aluminum Contact Boards |
A | AHP | C | ||||||
|
High Temp Structural Insul. |
CS85 | P | I&M | ||||||
|
Low Temp Industrial Board |
HT | 1000 | |||||||
|
High Density Millboard |
2200 | ||||||||
| Moisture % of dry wt | 1.0 | - | 2.5 | 2.5 | 2.5 | 3.0 | 3.0 | 12 | 7 |
| Thermal Conductivity (Mean Temperature, Btu-in/ft2, hr, °F ) | |||||||||
| 250°F | - | 0.86 | - | - | - | - | - | 2.4 | 2.4 |
| 400°F | 2.13 | 0.85 | - | - | 0.99 | 1.13 | 0.81 | - | - |
| 600°F | - | 0.85 | - | - | 1.00 | 1.15 | 0.79 | - | - |
| 800°F | 1.94 | 0.83 | 1.92 | 1.47 | 1.03 | 1.16 | 0.81 | - | - |
| 1000°F | 2.01 | 0.80 | 1.95 | 1.52 | 1.06 | 1.17 | 0.86 | - | - |
| Thermal Conductivity Mean Temperature, W/m°K | |||||||||
| 121°C | - | 0.12 | - | - | - | - | - | 0.34 | 0.34 |
| 205°C | 0.31 | 0.12 | - | - | 0.14 | 0.16 | 0.12 | - | - |
| 316°C | - | 0.12 | - | - | 0.14 | 0.17 | 0.11 | - | - |
| 425°C | 0.28 | 0.12 | 0.28 | 0.21 | 0.15 | 0.17 | 0.12 | - | - |
| 538°C | 0.29 | 0.12 | 0.28 | 0.22 | 0.15 | 0.17 | 0.12 | - | - |
| Shrinkage %: 24 hrs @ | 1600°F | 1800°F | 1350°F | 1350°F | 1350°F | 1200°F | 1200°F | 600°F | 1000°F |
| Length/width | 0.24 | 1.0 | 0.1 | 0.2 | 2.3 | 0.6 | 0.4 | 0.85 | 0.44 |
| Thickness | 2.0 | - | 0.8 | 0.9 | 9.4 | 2.1 | 1.4 | 3.7 | 1.33 |
| Electrical | |||||||||
| Arc Resistance, Seconds ASTM D 495 |
304 | - | - | - | - | - | - | 260 | 272 |
| Volume Resistivity, ohm-cm ASTM D 257 |
4.5x1012 | 7x1012 | - | - | - | 5.0x108 | 9.8x107 | 7.1x1010 | 1.25x1013 |
| Dielectric Strength, v/mil ASTM D495 |
61 | 61 | - | - | - | 46 | 45 | 35 | 56 |
| Screw Holding Strength @ 7/8" penetration | |||||||||
| lbs | 860 | - | 240 | 250 | 220 | 500 | 200 | - | - |
| kg | 397 | - | 109 | 113 | 100 | 227 | 91 | - | - |
Warranty
BNZ Materials warrants that its products are manufactured in accordance with its applicable material specifications and are free from defects in workmanship and materials using BNZ's specifications as standard. Every claim under this warranty shall be deemed waived unless in writing and received by BNZ within thirty (30 days of the date the defect was discovered and within one (1) year of the date of the shipment of the product.
BNZ MAKES NO OTHER REPRESENTATIONS OR WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, IN FACT OR IN LAW, INCLUDING WITHOUT LIMITATION, THE WARRANTY OF MERCHANTABILITY OR THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THE LIMITED WARRANTY SET FORTH ABOVE.
Limitation of Liability
It is expressly understood and agreed that the limit of BNZ's liability shall be the resupply of a like quantity of non-defective product and that BNZ shall have no such liability except where the damage or claim results solely from breach of BNZ's warranty.
IT IS ALSO AGREED THAT BNZ SHALL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, OR OTHER DAMAGES FOR ANY ALLEGED NEGLIGENCE, BREACH OF WARRANTY, STRICT LIABILITY, OR ANY OTHER THEORY, OTHER THAN THE LIMITED LIABILITY SET FORTH ABOVE.
BNZ Materials,
Inc.
E-mail: info@bnzmaterials.com
Web page by ICG Link, Inc.